Start with degradation mechanisms
A signal is valuable when it answers a question. Start with possible failure modes and the phenomena that precede them. This understanding guides the choice of measurements and indicators.
Available data may come from interventions, occasional measurements or sensors. Its context, quality and frequency should be reviewed before building monitoring logic.
Connect measurements to operation
A temperature or vibration change can have several explanations. Load, speed, environment and machine condition influence observations. Comparing values without considering these factors can produce alerts that are hard to interpret.
Condition monitoring therefore connects measurements with an understanding of operation. Alert criteria need to be discussed with the teams that will verify signals and decide on interventions.
Start with a useful scope
An initial approach can focus on a small set of critical assets. This helps verify measurement relevance, clarify expected decisions and adjust the monitoring setup.
R&D MECA can support this scoping: monitoring needs, indicators, technical feasibility and integration with your existing maintenance approach.




